Page 1
TWISTER 2700XV Original Instructions For all customer enquiries or for replacement parts, contact:- ¤ 01325 300303 www.flymo.com customer.services@husqvarna.co.uk...
IMPORTANT ! Please check the contents of the carton are correct BEFORE assembling your new Flymo product. IF ANY PARTS ARE MISSING CONTACT:- Husqvarna UK Ltd Customer Service Department direct Telephone : 01325 300303 If not used properly this product can be dangerous. The warnings and safety instructions must be followed to ensure reasonable safety and efficiency in using this product.
Page 3
3. Only use extension cables specifically designed for outdoor use. CONNECTORS IMPORTANT • Flymo connectors are suitable for use with 2 core cable only. Under no circumstances should these connectors be used for earthed products. • All Flymo connectors and cables are of splashproof construction.
Page 4
Blow Tube Assembly 1. Attach the blow tube to the product as shown in Fig A, ensuring it clicks securely into position. Converting from Blower to Suction 1. Turn the product over and press the release catch on the Blow Tube (E1).
Page 5
6. Attach the assembled Suction Tube to the product aligning the arrows as indicated (G1). 7. Turn the Suction Tube until it clicks into position (G2). 8. Secure the wire hook into postion and close the catch (G3). 9. Place the loop on the Debris Bag over the end of the Suction Tube (H1) 10.
T o prevent dust irri- tation, the wearing of a face-mask is recommended. Never point your product at bystanders. Using As A Blower Blow Mode - The product will blow debris from pa- tios, paths, driveways, lawns, bushes, borders etc.
A network of specialist dealers can be found in your local Yel- low Pages. T o obtain service on your Flymo product simply telephone or visit your local Service Centre. Should you re- quire service under the terms of our guarantee the Service Centre will require proof of purchase.