Securing The Tv To The Wall; Anti-Theft Kensington Lock - Samsung 670 Installation Manual

Caution: Pulling, pushing, or climbing onto the TV may cause the TV to fall. In particular, ensure that your children do not hang over or
destabilize the TV; doing so may cause the TV to tip over, resulting in serious injuries or death. Follow all safety precautions provided on
the included Safety Flyer. For added stability, install the anti-fall device for safety purposes, as follows.
To avoid the TV from falling
1. Put the screws into the clamps and firmly fasten them onto the wall. Confirm that the screws have been firmly installed onto
the wall.
You may need additional materials such as anchors depending on the type of wall.
Since the necessary clamps, screws, and string are not supplied, please purchase these additionally.
2. Remove the screws from the centre back of the TV, put the screws into the clamps, and then fasten the screws onto the TV
again.
Screws may not be supplied with the product. In this case, please purchase screws with the following specifications.
3. Connect the clamps fixed onto the TV and the clamps fixed onto the wall with a strong string and then tie the string tightly.
NOTE
Install the TV near to the wall so that it does not fall backwards.
It is safe to connect the string so that the clamps fixed on the wall are equal to or lower than the clamps fixed on the TV.
Untie the string before moving the TV.
4. Verify that all connections are properly secured. Periodically check the connections or any sign of fatigue for failure. If you
have any doubt about the security of your connections, contact a professional installer.
The Kensington Lock is not supplied by Samsung. It is a device used to physically
secure the system when using it in a public place. The appearance and locking
method may differ from the illustration depending on the manufacturer. Refer to the
manual provided with the Kensington Lock for additional information on its proper
use.
To lock the product, follow these steps:
Please find the "K" icon at the back of the TV. A kensington slot is next to the
"K" icon.
1. Wrap the Kensington lock cable around a large, stationary object such as desk or
chair.
2. Slide the end of the cable with the lock attached through the looped end of the
Kensington lock cable.
3. Insert the locking device into the Kensington slot on the product (1).
4. Lock the lock.
These are general instructions. For exact instructions, see the User Manual supplied with the locking device.
The locking device has to be purchased separately.
The location of the Kensington Lock may differ depending on its model.

Securing the TV to the Wall

Anti-theft Kensington Lock

1
<Optional>
57
English