Setting The Time - Samsung 670 Installation Manual

¦
Multi Code Remote Control
Multi Code Remote Control is a special transmitter which is designed to control multiple TVs with one remote.
This function is useful when there is more than one TV in one location such as a hospital. The Set ID number will be displayed
in the source OSD. It is possible to support up to 9 different remote key transmission for multi code.
The initial ID code of each TV is "0".
The ID code can be set and reset in Analog TV mode or PC mode. (not available in TTX or DTV channels)
– The ID code can be from 0 to 9.
– Press the RETURN
– The Set ID OSD will be displayed in a central position.
– The following words will be displayed. "The Remote control code is set to x. If you want to change the Remote control
code. Enter the digit you want to change." (x is the digit number) This OSD will be displayed until the exit key is pressed.
Remote control code is set to 0. If you want to
change Remote control code, enter the digit you
want to change.
– For example, the TV and Remote control will be set to ID code #1 if the user presses #1.
– The following words will be displayed."Remote control code is changed to 1". The TV can then only be controlled by a
remote control with the same ID code as the TV.
– If the ID code between the remote control and the TV does not match, the following words will be displayed.
" TV ID x" (x is the TV's ID)
– To reset the ID code, press the
control will be reset to "0". "Remote control code is set to 0." will be displayed.
– The way to set or reset the ID may differ depending on the remote control. See the table below.
¦

Setting the Time

O
MENU System
y The time is entered
– Press the remote control button to select Clock and set up the time.
y Setting the Interactive Mode Time
– If the Hotel System transmits the time information, the time is set
automatically.
– If the Hotel System does not transmit the time information, the time cannot
be displayed.
If the time is set, the clock will be displayed on the front panel.
32
English
+ MUTE keys for longer than 7 seconds and the digit key you want to set.
EXIT + MUTE
Time Clock Clock Set
keys for longer than 7 seconds. The ID codes of both the TV and Remote
Time
Clock
Sleep Timer
Wake-up Timer
Clock
Clock Mode
Clock Set
Time Zone
Off
Manual
Auto