Assembling The Swivel (32 Inch Tvs Or Larger) - Samsung 670 Installation Manual

HG28EB670, HG28EB675
1
2
When installing the stand, you should add a rotary valve (round metal) which have a swivel function and fix it using two
screws on the stand bracket. When you want to use the swivel function, you should fix the stand as the instruction.
WARNING: To prevent injury, this apparatus must be securely attached to the floor/table in accordance with the
installation instructions.
The TV stand more than 32inch supports the swivel function. The swivel angle support all of 20°, 60° and 90° and you can
change the swivel angle by using BRACKET HOLDER SWIVEL.
¦
20° ~ 60° swivel
If you assemble the wedge on the bottom of the stand to the hole of BRACKET HOLDER SWIVEL where 20° or 60° is marked,
the swivel angle becomes each 20° ~ 60° in the left and right side.
20° 60°
¦
90° swivel
If you assemble only screws after you remove BRACKET HOLDER SWIVEL, the swivel angle becomes each 90° in the left and
right side.
6
English
A-3

Assembling the swivel (32 inch TVs or larger)

C
(M4 X L12)
20°
Place a soft cloth over
a table to protect the
TV, and then place
the TV on the cloth
screen side down.
Insert the Stand
Guide into the slot on
the bottom of the TV.
x3
60°