Sony MDR-DS6000 Operating Instructions Manual page 19

4
Slide the INPUT SELECT switch to select the component you want to listen to.
INPUT SELECT
ANALOG DIGITAL
,.;::.===.~.
===. . . . .
(_1__
~
.....__ : J
Position of switch
DIGITAL
ANALOG
Selected sound source
Sound of the component connected to DIGITAL IN jack.
Sound of the component connected to LINE IN jacks.
Note
To listen to dual audio (MAIN/SUB) sound sources, connect to the LINE IN jacks, and then
select the sound source you want to listen to on the player, TV, or other component.
5
Start playback of the component selected in step 4.
6
Slide the switch to select the desired sound field, EFFECT or COMPRESSION.
EFFECT switch
EFFECT
~US/C OFF CINE~
r:r==~
. . ·
(7
~-~lJ
Position of switch
OFF
CINEMA
MUSIC
Sound field and suitable sound source
Normal playback of the headphones.
Produces the kind of surround sound that is found
in
a typical movie
theater. Suitable for movie sound sources.
Produces the kind of sound field that would be found
in
a listening
room with good acoustics. Suitable for music sources.
Note
The volume of the headphones may vary, depending on the input signal and the setting of
the EFFECT switch.
(Continued)
Operation
I
19
u5