Sony MDR-DS6000 Operating Instructions Manual page 17

Setting the input level
If the volume is low using the analog input, set the ATI (attenuator) switch to "0 dB."
ATT
OdS
IIID
-8dS
+-
Setting
OdB
--s
dB
Connected components
TV, portable components, and other components with a low output level
Other components (initial settings)
Notes
• Be sure to lower the volume before setting the AIT switch.
• If audio input to the LINE IN jacks is distorted (sometimes, noise can be heard at the same
time), set the AIT switch to /1-8 dR/I
Connection
I
17
US