Daikin FTXS20J2V1B Operation Manual page 14

■ To set the flaps or louvers at desired position
• This function is effective while flaps or louvers are in auto swing mode.
Press
desired position.
• In the 3-D airflow, the flaps and louvers move in turn.
• " " or "
CAUTION
• Always use a remote controller to adjust the angles of the flaps and louvers. If you attempt to
move the flaps and louvers forcibly with hand when they are swinging, the mechanism may
be broken.
• Always use a remote controller to adjust the louvers angles. In side the air outlet, a fan is
rotating at a high speed.
NOTE
■ Note on the angles of the flaps
• The flaps swinging range depends on the
operation. (See the figure.)
■ Note on 3-D airflow
• Using 3-D airflow circulates cold air, which
tends to collected at the bottom of the room,
and hot air, which tends to collect near the
ceiling, throughout the room, preventing
areas of cold and hot developing.
and when the flaps or louvers have reached the
" disappears from the LCD.
In DRY operation or
COOL operation
COMFORT
8˚
AIRFLOW
15˚
50˚
Upper limit
Lower limit
In HEAT operation
Stop operation
30˚
Upper limit
70˚
Lower limit
80˚
COMFORT AIRFLOW
In FAN operation
8˚
Upper limit
80˚
Lower limit
Stop operation
Stop operation
13