Section
12
Installation
Connecting the power cord
Note:
Depending on the kind of vehicle, the
function of 2* and 4* may be different.
In this case, be sure to connect 1* to 4*
and 3* to 2*.
ISO connector
Note:
In some vehicles, the ISO connector may be divided into two. In
this case, be sure to connect to both connectors.
48
En
2*
1*
4*
3*
Yellow (2*)
Yellow (1*)
Back-up
Connect to the constant 12 V
(or accessory)
supply terminal.
Red (4*)
Red (3*)
Accessory
Connect to terminal controlled by
(or back-up)
ignition switch (12 V DC).
Orange/white
Connect to lighting switch terminal.
Black (chassis ground)
Connect to a clean, paint-free metal location.
Autogood products «130»
This product
Connect leads of the same
color to each other.
Fuse resistor
Fuse resistor
Speaker leads
White:
White/black:
Gray:
Gray/black:
Green:
Green/black:
Violet:
Violet/black:
Front left
Front left
Front right
Front right
Rear left or subwoofer
Rear left or subwoofer
Rear right or subwoofer
Rear right or subwoofer