7
Troubleshooting
Troubleshooting
Camera problems
Status
Camera does not
turn on
Camera does not turn
off
Camera buttons and
controls do not
function
LCD is too dark.
Pictures remaining
number does not
decrease after taking a
picture
Flash does not fire
Memory card is almost
or entirely full
Memory card not
recognized or camera
freezes with card
Can't hear the audio
portion of a video.
www.kodak.com/go/support
Solution
■
Make sure the batteries have power and are installed correctly
(see page
1).
■
Adjust the LCD Brightness setting
■
Continue taking pictures. The camera is operating normally.
(The camera estimates the number of pictures remaining after each
picture is taken, based on picture size and content.)
■
Check the flash setting, and change as needed
NOTE: The flash does not fire in all modes.
■
Transfer the pictures to the computer
■
Delete pictures from the card
■
Card may be corrupted. Format the card in the camera
page
35).
■
Use another memory card. Only SD or SDHC Cards are supported.
■
Audio is captured during video recording. Audio can be heard
when the video is played on a computer or when the camera is
connected to a TV (see
(see page
(see page
(see page
20) or insert a new card.
page
24).
33).
(see page
8).
36).
(see
40