Parts Included; Optional Accessories - GE JV535 Owner's Manual And Installation Instructions

DAMAGE—SHIPMENT/INSTALLATION
• If the unit is damaged in shipment, return the unit to the
store in which it was bought for repair or replacement.
• If the unit is damaged by the customer, repair or
replacement is the responsibility of the customer.
• If the unit is damaged by the installer (if other than
the customer), repair or replacement must be made
by arrangement between customer and installer.
MOUNTING SPACE
66" or more
from the floor
to the top of
the hood
NOTES:
• This range hood is for installation over ranges up to
36" wide.
• If you are going to vent your range hood to the
outside, see the "Ducting Requirements" section for
exhaust duct preparation.
1 Ft = 0.3 m
1" = 2.5 cm
Installation Instructions
Bottom edge of
cabinet needs
to be 30" or
more from
the cooking
surface
30"
min.
TOOLS YOU WILL NEED
Flat blade and Phillips
screwdrivers
Saw (saber or keyhole)
Pliers
1/4" pivoting
hex socket
Caulking
Flashlight

PARTS INCLUDED

PART
Metal Grease Filters
Mounting Screws
Exhaust Adaptor/Damper
(for 3¼" x 10" rect. venting)
Exhaust Adaptor Screws
Exhaust Adaptor
(for 7" round venting)
PARTS YOU MAY NEED
Damper for 7" Round
Exhaust Adaptor (Obtain Locally)

OPTIONAL ACCESSORIES

These kits can be ordered from your GE supplier.
Cord Kit—For both 30" and 36" models,
order Kit no. JXHC1.
Charcoal Filters—JV5 Series only, if recirculating
For 30" hood models, order Kit no. WB02X11000.
For 36" hood models, order Kit no. WB02X11001.
8
Pencil
Duct tape
Electric drill Metal snips
(in some
applications)
Tape measure Wire stripper
Level
1/4" Nutdriver
QUANTITY
2
4
1
1
1