Fast Forward/Rewind; A-B Segment Repeat; Repeat Playback; Intro Playback - Hyundai H-CMD7080 Instruction Manual

on the RC to select the desired track/chapter.

Fast forward/rewind

Press and hold or
backward or forward playing.
When fast backward/forward playback
reaches the previous or next track, the unit will
resume normal playback.

A-B segment repeat

Press ZOOM/A-B button to set point A,
press one more time to set point B and start
A-B repeating. Press this button one more time
to cancel the repeating function.

Repeat playback

Press RPT/P.SCAN button to start repeat
playing. Press one more time to cancel. The
repeating sequence:
• For DVD: Repeat OFF => Repeat TITLE
=> Repeat Chapter.
• For CD/VCD/MP3: REP 1 => REP DIR =>
REP ALL => REP OFF.

Intro playback

Press INT button to activate introduction
function. Several initial seconds of each track
will be played. Press the button again to cancel
intro playback.

Random playback

Press RDM/BAND button to activate random
playing mode. Press one more time to return to
normal playing.
Programming the playback
• Press PROG/PTY button to open program
menu.
• Use cursor buttons to select the program
position and use number buttons to input the
desired track/title/chapter (depending on the
disc type).
• Press button on the RC or press
MEM button on the panel to start program play,
or move the cursor to select PLAY and press
ENTER button on the RC or OK button on the
panel to play.
button on the RC or OK button on the panel to
delete the programmed list.
buttons for fast
show current playback information, such as
number of track/chapter/title, current track/
chapter/title time elapsed/remaining, total track/
chapter/title time remaining (depending on the
disc type).
USB/SD/MMC card, press and hold repeatedly
ZOOM/A-B button on the RC, the picture will
be zoomed in the sequence: X2 => X3 => X4
=> X1/2 => X1/3 => X1/4 => Normal.
set the playback parameters for the current
chapter/track/time directly (track/title/chapter
number or time). Press OK button on the panel
or ENTER button on the RC to start playback
from the set number or time.
images at different camera angles. If a disc
doesn't support multi-angle playback, this
function will not work.
only)
AUDIO button on the RC repeatedly to select
the audio language to listen. This function will
not work if a disc does not support multi-
language audio.
only)
subtitle, press SUB-T button on the RC
• Move the cursor to CLEAR, press ENTER
OSD (On Screen Display) function
Press OSD button on the RC repeatedly to

Zooming in/out

During playback of video or images on disc/

GOTO

Press and hold GOTO/AUDIO button to
Changing angle (for DVD only)
Press ANGLE button on the RC to playback
Selecting audio language (for DVD
During DVD disc playback, press GOTO/
Selecting subtitle language (for DVD
If your DVD disc supports multi-language
Operation
17