Drill Master Drill Doctor 500X User Manual page 5

• DRESS PROPERLY. Do not wear loose clothing or jew-
elry; they can be caught in moving parts. Wear protec-
tive hair covering to contain long hair.
• USE PROTECTIVE EQUIPMENT. Use safety glasses.
Use face or dust mask if working operations create
dust.
• DO NOT ABUSE THE CORD. Never yank the cord to
disconnect it from the socket. Keep the cord away from
heat, oil and sharp edges.
• MAINTAIN TOOL WITH CARE. Keep the
clean for best and safest performance. Follow
tor ®
instructions for maintenance and changing acces-
sories. Inspect cords periodically and if damaged have
them repaired by an authorized service facility. Inspect
extension cords periodically and replace if damaged.
Keep unit dry, clean and free from oil and grease.
• DISCONNECT TOOLS. Always disconnect the
Doctor ®
accessories, such as the diamond sharpening wheel.
When not in use, disconnect from the power supply.
Never touch internal parts of the sharpener when it is
turned on or plugged in. The rotating diamond wheel
can cause injury.
• AVOID UNINTENTIONAL STARTING. Make sure
switch is in the "OFF" position before plugging in.
• STAY ALERT. Watch what you are doing, use common
sense and do not operate the tool when you are tired.
• CHECK DAMAGED PARTS. Before use of the tool, it
should be carefully checked to determine that it will
operate properly and perform its intended function.
Check for alignment of moving parts, binding of mov-
ing parts, breakage of parts, mounting and any other
conditions that may affect its operation. A guard or
other part that is damaged should be properly repaired
or replaced by an authorized service center unless oth-
erwise indicated in the instruction manual. Have defec-
tive switches replaced by an authorized service center.
Do not use the tool if the switch does not turn it on and
off. Do not use if the grinding wheel is damaged. Use
only grinding wheels recommended by
www.drilldoctor.com
when cleaning, inspecting, and changing
Drill Doc-
Drill
Drill Doctor
.
®
3