Advertisement
Using the
iBT24
Playing Audio via Aux In
1.
Connect the included
3.5
mm audio plug to the headphone or line-out jack on your audio device and
the other end into the Aux-in jack on the back of the unit.
2. Move the Power ON/OFF Switch to the ON position (right} to listen to audio via aux in. The
indicator light will flash blue.
3. Power on the audio device and use the controls on the device to play or pause audio, navigate tracks
and control volume. If your audio device is already paired with the
unit,
the light will glow steadily
blue as in Bluetooth mode, but you will hear your audio via aux-in.
4.
When done listening, move the Power ON/OFF Switch to the OFF position (leh) to turn the unit
off.
Remember to turn off your audio device, too.
Playing Audio via Aux Out
You can connect the unit to an external speaker via the Aux-out jack located on the back of the unit to
expand the audio playing in Bluetooth or Aux-In modes.
1 .
Connect a
3.5
mm audio cable plug to the Aux- out jack on back of the unit and connect the other
end to the line-in jack on your external
speaker.
2. Move the Power ON/OFF Switch to the ON position (right}.
3.
Power on a Bluetooth or aux-in audio device and use the controls on the device to play or pause
audio, navigate tracks and control volume.
4. When done listening, move the Power ON/OFF Switch to the OFF position (left} to turn the unit off.
Remember to turn off your audio device, too.
8
Advertisement
