Using The Speakerphone Feature; Playing Audio Via Aux In - iHome iBT36 Instruction Manual

Using the Speakerphone feature

NOTE: The unit must be powered on to receive a call and a Bluetooth phone must be linked.
1. When a call is received, playing music is muted to hear the ring tone. Press the
or press the End Button to ignore it. For call waiting function, press the
call on hold and answer a new call; press the
2. When a call is completed, press the

Playing Audio via Aux In

1. Connect one end of a standard 3.5mm stereo audio cable (not included) to the Aux in jack on the side of
the unit under the waterproof cover and connect the other end to the headphone or line-out jack on your
audio device.
2. Press the Power Button on the unit to turn it on.
3. Power on the audio device and use the controls on the device to play or pause audio, and navigate
tracks.
4. Press the – Button or + Button to adjust the volume on the unit. Press and hold for rapid volume change.
You can also adjust volume on your device.
5. When done listening, press the
device, too.
Note: Do not play a Bluetooth device while an aux in device is playing or you will not hear the
aux in audio.
Mobile Phone
End Button to end the call and resume previous function.
Power Button to turn the unit OFF. Remember to turn off your audio
PC/Tablet MP3/MP4
Game Devices iPod Laptop
Using the
Talk Button to switch between the calls.
7
iBT36
Talk Button to answer the call,
Talk Button to place a currently active