Table of Contents
Advertisement
16
C
1: I
HAPTER
NTRODUCING THE
Rear Panel
R
OUTER
The LED lights up and stays on when the connection between ADSL
service and the Router is OK. If the LED is off, nothing is connected or
there is a problem (refer to
6 Data DSL Status LED
If the LED is flashing, the link is OK and data is being transmitted or
received over the internet.
has failed on a PPPoE or PPPoA ADSL connection
The Sync DSL LED and Data DSL LED are excellent diagnostic indicators.
If interpreted correctly they can give a reliable indication of the cause of an
ADSL connection failure.
The rear panel
(Figure
Ethernet ADSL port, a power adapter OK LED, and a power adapter
socket.
Figure 4 Router - Rear Panel
7 Wireless Antennae
The antennae on the product should be placed in a 'V' position when
initially installed.
CAUTION: Do not force the antennae beyond their mechanical stops.
Rotating the antennae further may cause damage.
8 ADSL Port
Using the RJ11 cable provided, connect your Router to the telephone
socket via a splitter.
or
Using the RJ45 cable provided, connect your Router to the telephone
socket via a splitter.
9 Power Adapter Socket
Chapter 6
"Troubleshooting").
If the LED is off this can also indicate the login
4) of the Router contains four LAN ports, one
Advertisement
Table of Contents
