Sony XDR-S60DBP Operating Instructions

DIGITAL RADIO
DAB/FM
Operating Instructions GB
©2013 Sony Corporation
XDR-S60DBP

Listening to the Radio

1 2
Turn on the radio. Select the band (DAB or FM).
Presetting stations
Preset favourite stations to the 5 preset buttons. You can preset both a DAB and FM station
for each of the 5 buttons.
1 2
Press and hold the desired preset button (1 – 5) until
Tune to the station you want.
"Stored to [PRESET x]." appears on the display.
Follow steps 1 to 3 in "Listening to the Radio"
above.
Listening to the Audio from an External Device
1 2
Connect the external device to the
Turn on the radio.
radio.
Portable
digital music
player, etc.
Audio
connection cable
(not supplied)
To AUDIO IN
4-463-181-12(1)

Getting Started

1
Connect the radio to the mains and extend the antenna.
AC adaptor
Printed in China (supplied)
To DC IN
3
Select a desired station or service.
Turn the control dial to make a selection, then
press the dial.
Press BACK to exit
the station list.
3
Repeat steps 1 and 2 to preset
another station.
Example: Presetting a DAB station to the Changing a preset station
preset button "1"
1
Tune to a new station.
2
Press and hold the preset button you
want to change until "Stored to
[PRESET x]." appears on the display.
The preset station on the selected
button will be replaced by the new one.
Tip
The preset stations remain in the radio's
memory even after an auto tune is performed.
3
Select AUDIO IN.
2
Turn on the radio.
If it is the first time the radio is turned on, auto tune is performed automatically.
Tips
• To perform auto tune again later, see "To make a new station list" below.
• You may choose to receive FM station names later, since the process may take a long
time depending on the number of stations. See "Setup Menu Options" for details on how
Press BACK to cancel the
to receive FM station names.
auto tune process while
in progress. [MENU]  Edit FM Station List  Get FM Station Name
Station currently Secondary service Selected
being received (after the "L" mark) station
Station currently Station name* Selected
being received station
* Displayed only when RDS data has been received.
Listening to a preset station
1 2
Select the band (DAB or FM). Press the desired preset button (1 – 5).
To adjust the volume
4
Start playing your selection on
the connected device.
Notes
• When AUDIO IN is selected, the radio turns
off automatically after about 20 minutes if
there is no audio signal input.
• When the sound source from the AUDIO IN
jack is originally stereo, the left and right
stereo channels are mixed and the speaker
output will be in monaural.
3
Select "Now" or "Later" to complete the auto tune.
You can choose whether to
receive FM station names
now or later.
See "Setup Menu Options" for manual tuning.
To make a new station list
If you have moved to another region, or when the radio is reset, perform the auto tune
again.
Select DAB or FM*, then press AUTO TUNE.
"SC" lights up when
a secondary service
is received.
Scrolling text
(DLS: Dynamic Label Segment of
up to 128 characters)
* Only when the tuning mode is set to "By Station List." When AUTO TUNE is pressed in "Manual
Station name*
Tune" mode, scan tuning will start instead. See "FM Tune Mode" in "Setup Menu Options" for
Scrolling text
details.
(RT: Radio Text of up to 64 characters)*
Example: When the preset button "1" is
pressed
Tips on receiving FM station names
• FM station names will be received and stored in the radio while you are listening to the
broadcasts, even if you have not received them during the auto tune process.
• FM station names may not be transmitted, depending on the station.
Notes
• The currently stored station list will be cleared once the auto tune process has started.
• When the setup menu is displayed, auto tune is not performed even when AUTO TUNE is
Note
pressed.
To prevent the preset
from being changed by
mistake, do not hold the
preset button down.
To listen through headphones To use the radio on batteries
Connect headphones that have a stereo or Press down on the battery
compartment cover at  and
monaural* mini plug (not supplied).
slide it in the direction of the
arrow .
To close the cover, slide it in the direction of the arrow  until it clicks
To  (headphones)
into place.
* When listening to stereo sound using monaural Tip
headphones, you will hear sound from the left channel
"
only.
Turn the control dial ()
to make a selection, then
press the dial ().
After auto tune is
completed, the radio
receives the first station in
the DAB station list stored
by auto tune.
Select "OK" to start
the auto tune
process.
The radio receives the
first station in the new
station list.
The radio receives the
first station in the new
station list.
Insert the  side of the
battery first.
Three LR14 (size C)
batteries (not
supplied)
" appears on the display when the radio is powered by the batteries.