Reattach Display Module - Carrier Performance TP-PRH-A Installation Instructions Manual

Fig. 16 - - Reattach Display Module
9. Turn on power to equipment. On power up, all display segments will light
for 5 sec. For the next 5 sec a 2- - digit code appears on large display which
identifies Thermidistat Control configuration. Refer to Option 33.
a. AC — 1- - stage air conditioner with furnace or fan coil
b. HP — 1- - stage heat pump with fan coil
c. A2 — 2- - stage air conditioner with furnace or fan coil
d. H2 — 2- - stage heat pump with fan coil
e. hh — Hybrid Heat system with 1- - stage heat pump
f. h2 — Hybrid Heat system with 2- - stage heat pump
g. H — heating only system
h. C — cooling only system
23
A07220