Thermidistat Control Location - Carrier Performance TP-PRH-A Installation Instructions Manual

Carton contains the following components. See Fig. 3 for TP- - PRH- - A, - - B or Fig. 4
for TP- - NRH- - A, - - B:
1. Display Module
2. Stand- - off for Equipment Control Module
3. Outside Air Temperature Sensor, screws and pigtail
4. Equipment Control Module
Fig. 4 - - TP- - NRH- - A, - - B Carton Contents
1. Display Module
2. Stand- - off for Equipment Control Module
3. Outside Air Temperature Sensor, screws and pigtail
4. Equipment Control Module

Thermidistat Control Location

Thermidistat Control should be mounted:
Approximately 5 ft (1.5m) from floor.
S
9
A07686