Epson Stylus C58 Service Manual page 60

Epson Stylus C58/C59/ME 2/C79/D78/C90/C91/C92/D92/T20/T20E/T23/T26/S20/T10/T11/ME 30/T21/T24/T27/S21
ASF Unit Removal
1. Remove the screw (x1) from the side of the Lower Housing.
2. Remove the screws (x2), and remove the ASF Unit taking care not to scratch
it with the positioning tab.
Figure 4-68. Removing ASF Unit
DISASSEMBLY/ASSEMBLY
ASF Unit
Lower Housing
±
C.B.P 3X8 (Torque: 6 1Kgf.cm)
ASF Unit
Positioning Tab
Disassembling Printer Mechanism
Assemble the LD Roller as shown below.
LD Roller
Tabs
Figure 4-69. Assembling LD Roller (1)
1. Match the guide pin of the LD Roller Shaft with the positioning
hole of the Clutch.
2. Attach the tips of the Extension Spring 0.143 to the tab of the LD
Roller shaft and the tab of the Clutch.
3. Attach the cam side of the Spur Gear 36.8 to the hole of the Clutch.
LD Roller
Figure 4-70. Assembling LD Roller (2)
Whenever the LD Roller is replaced, apply G71 grease
A D J U S T M E N T
R E Q U I R E D
referring to Figure 6-4 (p.81)
6.
Revision E
LD Roller Shaft Guide pin
Positioning hole
Spur Gear 36.8
Extension
Spring 0.143
Clutch
Clutch
and Figure 6-5 (p.81) in Chapter
Confidential
60