Epson Stylus C58 Service Manual page 44

Epson Stylus C58/C59/ME 2/C79/D78/C90/C91/C92/D92/T20/T20E/T23/T26/S20/T10/T11/ME 30/T21/T24/T27/S21
5. Release the tabs (1) and (2) with a flathead precision screwdriver, and remove
the Holder Board Assy upward.
CR Unit
Tab (1)
Holder
Tab (1)
Board Assy.
Tab (2)
Figure 4-17. Removing Holder Board Assy
DISASSEMBLY/ASSEMBLY
CR Unit
Tab (2)
Tab (1) Tab (2)
Holder Board Assy
Disassembling Printer Mechanism
6. Release the tab and pull out the blade of the Sub FFC Guide from the slit, and
remove the Sub FFC Guide pulling out the guide pin (x1) from the notch.
Notch
Figure 4-18. Removing Sub FFC Guide
Do not touch or damage the nozzles or the ink supply needles of the
C A U T I O N
Printhead.
7. Remove the screw (x3) and lift up the Printhead with a longnose pliers.
±
C.B.P 2.5X8 (Torque: 3 1Kgf.cm)
Figure 4-19. Removing Printhead (1)
Revision E
Sub FFC Guide
Blade
Slit
Notch
Guide Pin
Confidential
44