Operating Your Café Series Blender - Sunbeam PB9500 Instruction/Recipe Booklet

Operating your Café Series
Blender
1. P lace the jug on the motor base by
locating it over the nodules on the rubber
dampening pad. The jug can be placed on
the motor base in 4 different positions.
2. P lace ingredients into the jug.
Note: Do not operate the blender when the
jug is empty.
3. P lace the lid firmly into position on the
jug. Always ensure the measuring cap is
in place when processing except when the
processing baton is inserted through the
opening in the lid.
Note: Always have the lid in position during
processing.
4. U sing the variable speed dial, select the
desired processing speed from 1 – 5 and
this will provide continuous processing
until the dial is turned anti-clockwise to
the OFF position.
Due to the high processing speed of the
Café Series ®
Blender, processing times are
significantly reduced over those of standard
blenders. Therefore we advise that until
you are familiar with the speed of the Café
Series ® Blender that you keep a close
watch on ingredients being processed.
Tip: Once processing has commenced, further
ingredients can be added by removing the
measuring cap and pouring ingredients
through the hole in the lid.
Note: Wait until blade comes to a complete
stop before removing the lid or jug.
®
9