Menus Example 1 - Tray 1 Transparencies - Oki C9600n User Manual

M 1 – T
ENUS EXAMPLE
To print on transparencies (accommodated in Tray1):
1. Ensure that the LCD panel indicates that the printer is
ready to print.
2. Enter menu mode by pressing either the Up-arrow or
Down-arrow button and press them repeatedly as
required until the Menus menu is highlighted.
3. Press the Enter button to select this menu.
4. Press the Up-arrow or Down-arrow buttons repeatedly
until Tray Configuration is highlighted.
5. Press the Enter button to select this Item.
6. Press the Up-arrow or Down-arrow buttons repeatedly
until Tray1 Config is highlighted.
7. Press the Enter button to select this Item.
8. Press the Up-arrow or Down-arrow buttons repeatedly
until MediaType is highlighted.
9. Press the Enter button to select this Item.
10. Press the Up-arrow or Down-arrow buttons repeatedly
to move through the range of media types until
Transparency is highlighted.
11. Press the Enter button to select this value.
12. Check that an asterisk (*) appears beside Transparency.
13. Press the Online button to exit menu mode and return to
the ready to print status.
1
RAY TRANSPARENCIES
C9600 User's Guide> 125