4. INSTALLATION & TEST
1
Before servicing, ask the customer what the trouble is.
2
Check the setup (power supply is 120 V AC, remove the transit bolts level the washer...,).
3
Check with the troubleshooting guide.
4
Plan your service method by referring to the disassembly instructions.
Service the unit.
5
After servicing, operate the appliance to see whether it functions correctly.
6
STANDARD INSTALLATION
The appliance should be installed as follows:
REMOVE THE SHIPPING
BOLTS
Remove the 4 shipping bolts
with the supplied wrench.
Do first lower side to remove
easily.
Keep the shipping bolts and
spanner for future use.
Insert the 4 caps (provided)
into the hole.
INSTALL THE APPLIANCE
ON A FLAT AND FIRM SURFACE
Keeping
10
ADJUST THE
LEVELING
Turn the leveling feet to
adjust the appliance.
Lower
Higher
Turn clockwise to raise;
counterclockwise to lower.