Using The Cable Clamps (Hot-Plug Psu) - Fujitsu PRIMERGY RX100 S7 Operating Manual

Hardware installation
5.4.2

Using the cable clamps (hot-plug PSU)

You can secure the power cords in cable clamps to ensure that the insulated
connectors cannot be disconnected from the server accidentally.
Figure 6: Using cable clamps
Ê Pull the cable clamp up.
Ê Thread the power cord through the cable clamp.
Ê Press the cable clamp down until it engages to secure the cable.
58 Operating Manual
RX100 S7