Configuring The Sas/Sata Raid Controller - Fujitsu PRIMERGY RX100 S7 Operating Manual

Starting up and operation
6.3.2

Configuring the SAS/SATA RAID controller

The server has an optional SAS/SATA RAID controller with "Integrated
Mirroring Enhanced" functionality or "MegaRAID functionality". You can
configure the SAS/SATA RAID controller either before or during installation with
the ServerView Installation Manager. Using the ServerView Installation
Manager is recommended.
I
The controller makes a separate utility available for IME configuration.
For further information, refer to the "Integrated RAID for SAS User's
Guide" (on the ServerView Suite DVD 2 under Industry Standard Servers -
Expansion Cards - Storage Adapters - LSI RAID / SCSI Controllers).
A separate utility is available to the controller for MegaRAID
configuration. For further information, refer to the "SAS Software User's
Guide" (on the ServerView Suite DVD 2 under Industry Standard Servers -
Expansion Cards - Storage Adapters - LSI Configuration Software).
Further information on modular RAID controllers is provided in the
"Modular RAID Controller Installation Guide" (on the ServerView Suite
DVD 2 under Industry Standard Servers - Expansion Cards - Storage Adapters
- LSI RAID / SCSI Controllers).
I
Descriptions of operating systems not covered in the controller manual
are provided in the corresponding readme files on the driver CDs.
74 Operating Manual
RX100 S7