Configuring The Server; Configuring The Onboard Sata Controller - Fujitsu PRIMERGY RX100 S7 Operating Manual

6.3

Configuring the server

This section contains information about configuring the server and installing the
operating system.
I
Make sure that the power saving functions are disabled in the Power
menu of the BIOS Setup during operation.
6.3.1

Configuring the onboard SATA controller

A SATA controller is integrated on the system board. You can configure the
onboard SATA controller either before or during installation with the ServerView
Installation Manager. Using the ServerView Installation Manager is
recommended.
I
The controller has its own configuration utility. For further information,
refer to the "Embedded MegaRAID Software User's Guide" (on the
ServerView Suite DVD 2 under Industry Standard Servers - Expansion Cards
- Storage Adapters - LSI RAID / SCSI Controllers).
I
Descriptions of operating systems not covered in the controller manual
are provided in the corresponding readme files on the driver CDs.
RX100 S7
Operating Manual
Starting up and operation
73