Loading Paper In The Multi-Purpose Tray (Mp Tray) - Brother  HL-4140CN User Manual

Chapter 2
d
Put paper in the tray and make sure:
 The paper is below the maximum
paper mark (b b b) (1).
Over filling the paper tray will cause
paper jams.
 The side to be printed on must be
face down.
 The paper guides touch the sides of
the paper so it will feed properly.
e
Put the paper tray firmly back in the
machine. Make sure that it is completely
inserted into the machine.
f
Lift up the support flap (1) to prevent
paper from sliding off the face-down
output tray or remove each page as
soon as it comes out of the machine.
1
12
Loading paper in the multi-
purpose tray (MP tray)
You can load up to 3 envelopes or special
print media in the MP tray or up to 50 sheets
of plain paper. Use this tray to print or copy on
thick paper, bond paper, labels or envelopes.
(For recommended paper to use, see Paper
capacity of the paper trays on page 21.)
Printing on plain paper, bond paper,
1
labels or glossy paper from the MP
tray
a
Open the MP tray and lower it gently.
2
2