Registering Bluetooth Unit - Kenwood DNX9960 Instruction Manual

Setup Menu

Registering Bluetooth Unit

Registers the Bluetooth unit to be
connected.
1 Display the Bluetooth Setup screen
> >
Touch [ ] [
SETUP]. (page 78)
2 Display the Connect Device List
screen
3 Search for a Bluetooth unit
1 1 1
1 Displays the registered Bluetooth
units.
[ ] When appears, the text display
is scrolled by touching it.
[Search] Searches for a Bluetooth unit.
[SP DEV] Registers a Bluetooth unit that
cannot be registered by normal register
(paring) operation.
⁄
• A new device cannot be registered if there
are 5 registered Bluetooth units. Delete
unnecessary registration. See <Bluetooth
Unit Connection> (page 90).
88 DNX series DNX9960/ DNX7160/ DNX7020EX
> >
] [Bluetooth
4 Display the PIN Code Set screen
1 1 1
1 Display the PIN Code.
[Search] Searches for a Bluetooth unit.
[Cancel] Cancels searching of Bluetooth
unit.
[PIN Code Set] Display the PIN Code
Set screen.
5 Enter PIN code
1 1 1
1 Enters a code number.
[Enter] Enter the PIN code specified for
the Bluetooth unit to register.
This button will not be active until at
least four PIN code digits have been
entered.
[Cancel] Cancels registration of PIN
code.
[Clear] Clears the code number.
6 Select the Bluetooth unit to register
1 1 1
1 Displays the searched Bluetooth unit.
Returns to the Connect Device List
screen.