Direct Search; Itunes Tagging - Kenwood DNX9960 Instruction Manual

HD Radio™ Control

Direct Search

Tuning by entering the desired frequency
or channel number.
Only with KTC-HR300 (optional accessory)
connected.
1 Display the Source Control Screen
See <Source Control Screen> (page 49).
2 Start Direct Search
3 Enter the frequency or channel
number
1 1 1
1 Enters the frequency or channel
number.
[Mode] Switches the search mode to
Frequency or Channel.
[Cancel] Cancels the direct search.
[Clear] Clears the frequency or channel
number.
4 Tune in the frequency or channel
52 DNX series DNX9960/ DNX7160/ DNX7020EX

iTunes Tagging

Using an iTunes Tagging enabled HD Radio
receiver you can tag your music. When
you hear a song you enjoy on your local
HD Radio station, you only have to press
the [ATT] button for at least 1 second. The
song's information will then be saved on
this unit. The saved songs will then show
up in a playlist called "Purchased" in iTunes
the very next time you sync your iPod to
your computer. So then you just need to
click and then easily buy and download
the song you were tagging directly from
the Apple iTunes Music Store.
Only with KTC-HR300 (optional accessory)
connected.
Registers a tag
1 sec.
"TAG" will be indicated on the display
when song information can be
registered.
The memory usage can be checked
1 Display the Source Control Screen
See <Source Control Screen> (page 49).
2 Display the Information Screen