Blomberg DW 24100 B Installation Manual page 21

x4
Ø 3 / 16 " (4mm)
y
x4
Ø 3 / 16 " (4mm)
y
7. Open the door and remove the two caps and
two screws inside the door at position 1 and 3
(Figure C).
C
8. Using the four screws Ø 3 / 16 " x 1 11 / 16 " (Ø
4mm x 43mm) provided, attach the wooden door
to the dishwasher at position 1 and 3 (Figure A).
A
9. Check the position of the wooden door and
make sure it is aligned properly (Figure B).
B
10. Tighten the screws in position 1 and 3
completely after the final alignment (Figure C).
C
18
USA