Connecting A Blu-Ray™ / Dvd Player, Satellite Receiver With Colorstream™ Or Vcr - Toshiba 40L3400U User Manual

28
Connecting Your TV
Connecting a Blu-ray™ / DVD player, satellite receiver with ColorStream™ or VCR
Connecting a Blu-ray
ColorStream
From
satellite dish
Satellite
IN
Satellite receiver, Blu-ray or DVD player
(Sample Illustration) 40/50L3400U—Connecting a Blu-ray™ /
DVD player or Satellite receiver with Colorstream
ColorStream
simultaneously.
Items needed:
Coaxial cables
v
Standard AV cables
v
If you have a mono VCR, connect L/MONO on the TV to your
VCR's audio out terminal using the white audio cable only.
Standard audio cables
v
Component video cables
v
v
v
/ DVD player, satellite receiver with
™
or VCR
™
TV back panel
AUDIO
OUT
L
Y
P P
B R
COMPONENT VIDEO VIDEO R
S-VIDEO
OUT
OUT
TM
and composite video cables cannot be connected
TM
You can connect the component video cables (plus audio
cables) from the DVD player or satellite receiver to the
COLOR STREAM HD terminal in the TV. The COLOR
STREAM HD terminal can be used to display Progressive
(480p, 720p) and Interlaced (480i, 1080i) scan systems.
Please note that 1080p is not supported. Check the User's
Guide of the DVD player in order to determine the best
output signal available.
If your DVD player or satellite receiver does not have
component video, connect a standard A/V cable to the
AUDIO/VIDEO terminal. If your DVD player has HDMI
video, see "Connecting an HDMI® or DVI device to the
HDMI® input" on page 29.
From antenna
Stereo VCR
VIDEO AUDIO
L R
IN IN from ANT
CH 3
CH 4
OUT
OUT to TV
L R
(or VCR).
TM
®