Zte WP805 User Manual page 78

7
Fax
4. If the port for "Standard 19200 bps Modem" is COM1 or COM2, click
"Properties...":
5. Select "Communications port" as "TAPI", "initialize" as "19200" bps, click
"OK".
6. Return to the interface of step 3 "modems and communications devic-
es properties", select " Receive setup..." in "General" sheet, select "Au-
tomatically answer incoming calls":
7. In "Advanced" sheet, select modem type, and select "Direct all data
calls to an available data communications program".
78