Table of Contents
Advertisement
3
Basic Operations
Press
3.4 Redialing
Press CALL/REDIAL key to redial the last number called after you
pick up the handset or press HANDFREE key.
3.5 Billing Information
The phone adopts pulse-charging mode and the charging unit is "unit".
When the call is over, the billing information will displayed. For example,
the message means: when a call is connected, 2unit will be displayed;
since then, 2units will be added per 10 seconds. If you dial a free number,
the phone will display 0unit. For example, if call duration is 15 seconds,
4units will be displayed. If call duration is 20 seconds, 6units will be
displayed.
Note: This function requires the network to support.
3.6 Call Menu
In put-through mode, you can enter the call menu by pressing Menu.
The operation methods are the same as those in the function menu; please
refer to Section 4.1 "Usage of Function Menu".
You can do the following operations in Call menu:
Hold /Retrieve
Keep the current session or resume the held call.
Mute
Not send local voice.
DTMF off/on
Enable or disable sending DTMF tone.
Menu
Enter the organizer menu.
Note: This Call menu only appears in the session process, which sup-
ports Three-way Call.
3.7 Making a Three-way Call
The phone supports the Three-way call. When two parties are talking,
key to return to the original state after ending call.
16
Advertisement
Table of Contents
