DEC a-Series Installation And Setup Manual page 36

Troubleshooting
Table 3-1: System Troubleshooting, continued
Problem
Security mode is enabled.
Password does not work.
3–8 Installation and Setup Guide
Possible Cause
User does not have correct
password.
Action
For Windows NT users, perform the
following steps:
1. Power off the system.
2. Open the system box.
3. Power on the system and wait for
the console to start.
4. Press the password reset button on
the MLB.
5. Power off the system.
6. Reassemble system.
7. Power on the system.
8. Set new password if desired.
NOTE: Take care to remember your
password.
Get necessary configuration data from
the equipment log where you recorded
it.
If you are a DIGITAL UNIX or Open
VMS user, consult Chapter 4 for
instructions on contacting DIGITAL
Customer Support.