DEC a-Series Installation And Setup Manual page 23

Table 2-1: Starting a Windows NT Installation, continued
Step Action
7 Type "S" to select additional devices.
or
Press [Enter] if you do not want to
specify additional storage devices.
8 Select Other.
9 Insert the floppy diskette labeled
Hardware Support Disk, Disk 1 of 1
(AK-RC1YA-CA) in drive A.
Press [Enter] to select the driver.
10 Press [Enter] to load the driver.
11 To continue,
Press [Enter].
12 (DIGITAL does not recommend
selecting [R] to repair Windows NT.)
Press [Enter] to continue with Setup.
13 Press [Enter].
14 Press [Enter].
15 Use the [Page Down] keypad to scroll
through the Windows NT licensing
agreement.
Setting Up an Operating System
Result or Displayed Text
Select the SCSI adapter you want from the following
list, or select "Other" if you have a device support disk
provided by an adapter manufacturer.
.
.
.
=>Other
"Please insert the disk labeled Manufacturer-supplied
hardware support disk into Drive A:."
You have chosen to configure a SCSI adapter for use
with Windows NT, using a device support disk
provided by an adapter manufacturer.
Select the SCSI adapter you want from the following
list, or press [Esc] to return to the previous screen.
=>e.g., Microsoft ATAPI driver
Follow the screen prompts for mass-storage device-
loading support.
Setup will load support for the following mass storage
devices:
Qlogic PCI SCSI Host Adapter
Microsoft ATAPI driver
Welcome to Setup. The Setup program for the
Microsoft® Windows NT® operating system version
4.0 prepares Windows NT to run on your computer.
To learn more about Windows NT Setup before
continuing, press [F1].
To set up Windows NT now, press [Enter].
To repair a damaged Windows NT version 4.0
installation, press [R].
To quit Setup without installing Windows NT, press
[F3].
Setup has recognized the following mass storage
devices in your computer:
Qlogic PCI SCSI Host Adapter
Microsoft ATAPI driver
The Microsoft Windows NT licensing agreement
displays.
A message indicating your choices displays.
Installation and Setup Guide 2–3