Additional Speedometer; Permanent Display - Mercedes-Benz SLS AMG Operator's Manual

Menus and submenus
158
Press the : or 9 button to select the
X
Display Unit Speed-/Odometer: Display Unit Speed-/Odometer:
tion.
You will see the selected setting:
miles miles .
Press the a button to save the setting.
X
Permanent display for outside tempera-
ture or additional speedometer
The Permanent Display: Outside Tem‐ Permanent Display: Outside Tem‐
perature/Speedometer perature/Speedometer
choose whether the multifunction display
shows the outside temperature or the speed
at the bottom right. The unit used in the addi-
tional speedometer depends on the display
unit set ( page 157).
Y
Press the = or ; button on the steer-
X
ing wheel to select the
Press the : or 9 button to select the
X
Inst. cluster Inst. cluster
Press a to confirm.
X
Press the : or 9 button to select the
X

Permanent Display

Permanent Display
You will see the selected setting
eter [km/h] eter [km/h]
Outside Temperature Outside Temperature.
Press the a button to save the setting.
X
Lights
Switching the daytime running lamps on/
off
This function is not available in Canada.
If you have activated the
and the light switch is in the à position,
the daytime running lamps are switched on
automatically when the engine is running. If it
is dark, the low-beam headlamps switch on
automatically.
In the dark, the following also light up:
the low-beam headlamps
R
the standing lamps
R
the tail lamps
R
the license plate lamp
R
the side marker lamps
R
km km
allows you to
Settings Settings menu.
submenu.
function.
Speedom‐ Speedom‐
or Speedometer [mph] Speedometer [mph]
Lights: Lights: function
Press the = or ; button on the steer-
X
func- ing wheel to select the
Press the : or 9 button to select the
X
or
LIGHTS LIGHTS submenu.
Press a to confirm.
X
Press the : or 9 button to select the
X
Lights: Lights: function.
You will see the selected setting:
or Disabled Disabled.
Press the a button to save the setting.
X
Setting the brightness for the display and
switches
You can use the
Switches: Switches: function to set the brightness of
the multifunction display and the switches in
the vehicle.
Press the = or ; button on the steer-
X
ing wheel to select the
Press the : or 9 button to select the
X
LIGHTS LIGHTS submenu.
Press a to confirm.
X
Press the : or 9 button to select the
X
Brightness Display/Switches: Brightness Display/Switches:
or
tion.
You see the selected setting
value of between 0 and 100.
Press the a button to save the setting.
X
Press the : or 9 button to increase
X
or decrease the brightness.
Activating/deactivating surround light-
ing and exterior lighting delayed switch-
off
The Locator Lighting: Locator
to set whether the exterior lighting should
come on when it is dark:
for 40 seconds after unlocking the vehicle
R
with the key.
The exterior lighting switches off if you
open the driver's door.
for 15 seconds after switching off the
R
engine and closing the doors.
If the engine is switched off and no doors
are opened, or if an open door is not closed,
Settings Settings
Brightness Display/ Brightness Display/
Settings Settings
Level Level
Lighting: function allows you
menu.
Enabled Enabled
menu.
func-
with a