Defrosting The Windshield; Maximum Cooling; Setting The Airflow; Switching The Mono Function On Off - Mercedes-Benz SLS AMG Operator's Manual

Setting the air distribution
Select key position 2 with the Start/Stop
X
button ( page 119).
Y
Press the _ button repeatedly until the
X
desired symbol appears in the display.
The indicator lamp in the à button goes
out. Automatic control is deactivated and
the air distribution is controlled according
to the selected setting.

Setting the airflow

Select key position 2 with the Start/Stop
X
button ( page 119).
Y
To increase/reduce: press the K or
X
I button.
Switching the mono function on/off
The MONO function is only available in vehi-
cles for Canada.
You can use the MONO function to adopt the
temperature and air distribution settings on
the driver's side for the front-passenger side.
Press the º button.
X
The indicator lamp in the º button lights
up or goes out.

Defrosting the windshield

i
You should only select the "Windshield
defrosting" function until the windshield is
clear again.
Select key position 2 with the Start/Stop
X
button ( page 119).
Y
To activate: press the ¬ button.
X
The indicator lamp in the ¬ button lights
up.
The system automatically switches to the
following functions:
high airflow
R
high temperature
R
Operating the climate control systems
air distribution to the windshield and
R
front side windows
air-recirculation mode off
R
To deactivate: press the ¬ button.
X
The indicator lamp in the ¬ button goes
out. The previously selected settings are
restored. Air-recirculation mode remains
deactivated.
or
Press the à button.
X
The indicator lamp in the ¬ button goes
out. Airflow and air distribution are set to
automatic mode.
or
Turn controls : or D clockwise or coun-
X
ter-clockwise (
or
Press the K or I button.
X
Switching maximum cooling on/off
The MAX COOL function is only available in
vehicles for the USA.
MAX COOL is only operational when the
engine is running.
When you activate MAX COOL, climate
control switches to the following functions:

maximum cooling

R
maximum airflow
R
air-recirculation mode on
R
To activate: press the Ù button.
X
The indicator lamp in the button lights up.
To deactivate: press the Ù button
X
again.
The indicator lamp in the button goes out.
The previously selected settings come into
effect again.
i
To deactivate MAX COOL press the ^,
Ã, or ¬ button.
page 107).
Y
111