Dvdivcd Video Operation; Opening/Closing The Tft Video Screen; Insert/Eject Disc; Accessing Dvd Mode - Jensen VM9213 Operation Manual

~
VM9213
t··· .
NOTE: For VCD play, the repeat function is not available
ifPBC is on.
Pausing Playback
Touch the play/pause button (» on the screen or press the
>/
II button on the remote control (18) to suspend or resume
disc play.
Slow Motion Playback
Press the
II~/BAND
button on the remote control for slow
motion playback (Slow Forward: 1/2, 1/4, 1/6, 1/7, Slow
Rewind: 1/2, 1/4, 1/6, 1/7).
Rewind
Press the
«
button (22) on the remote control or the «
button on the screen to play the current title in reverse. Keep
pressing and releasing the button to increase the rate from
"2X" to "4X", "8X", and "20X".
Press >/11 (18) on the remote control or touch the on screen
play button (» to resume normal play.
Fast Forward Playback
Press the» button (14) on the remote control or the»
button on the screen to fast forward. Keep pressing and
releasing the button to increase the rate from "2X" to "4X",
"8X", and "20X".
Press >/11 (18) on the remote control or touch the on screen
play button (» to resume normal play.
Repeat Playback
Press the REPT button (7) on the remote control or the
P
button on screen to alter repeat mode according to the
following:
DVD: Repeat Chapter, Repeat Title, Repeat Off
VCD (PBC Off): Repeat Single, Repeat Off
Sectional Repeat Function (A-B)
Use the A-B function to define a specific area of a disc to
repeat.
Press the REPT A-B button (6) on the remote control to
set the start point (A) of the repeated section.
Press the REPT A-B button again once you reach the
desired end point (B) of the repeated section. The
selected portion of the DVD will now repeat
continuously.
Press the REPT A-B button again to cancel the A-B
section setting and stop repeat play.
I
SUBTITLE
I
I
TITLE
IIU2/2IEJ
A
B
...........
---------_
.
I
m
[~]BACKI
o
EJWG
G
Using the Touch-Screen Controls
The touch key areas for DVD playback are outlined below.
A - Displays playing information
B - Displays on-screen control menu
Controlling Playback
To access the on-screen controls, touch the bottom 1/3 of the
screen (section B). Touch the 1/2 button to view a second
page of controls
Stopping Playback
Touch the stop button (_) on the screen or press the _
button (20) on the remote control to stop DVD play.
DVDIVCD VIDEO OPERATION
Accessing DVD Mode
To switch to DVD mode when a disc is already inserted,
press the SRC button (6) on the front panel or remote control
(8) or touch the top left corner of the screen.
NOTE: When properly installed, DVD video cannot be
displayed on the main TFT screen unless the parking
brake is applied. If you attempt to playa DVD while the
vehicle is moving, the TFT screen displays the following:
"Warning!!! It is illegal to view video while driving or
operating a motor vehicle. Set parking brake to view
video." Rear video screens, if applicable, will operate
normally.
Opening/Closing the TFT Video Screen
Opening the TFT Screen
To open the TFT video screen, press the OPEN button (4).
The unit beeps and then opens.
Closing the TFT Screen
Press the OPEN button (4) again to close the TFT screen.
Insert/Eject Disc
Upon inserting a DVD disc, DVD mode is entered and disc
play begins.
NOTE: If Parental Lock (Rating) is activated and the disc
inserted is not authorized, the 4-digit code must be
entered and/or the disc must be authorized. When
parental code is entered using the remote, the play/
pause button must be pressed to confirm entry. (See
"General Sub-menu Features" on page 9.)
You cannot insert a disc if there is already a disc in the unit or
if the power is off.
NOTE: DVD-R and DVD-RW will not play unless the
recording session is finalized and the DVD is closed.
Ejecting a Disc
Press the
~
button (11) on the unit or remote control (35) to
eject the disc. The unit automatically reverts to Tuner mode.
You may eject a disc with the unit powered off. The unit will
remain off after the disc is ejected.
Reset the Loading Mechanism
If the disc loads abnormally or an abnormal core mechanism
operation occurs, press and hold the ~ button (11) on the
unit or remote control (35) to reset the loading mechanism.
Normal operation resumes.
13