Toshiba Carrier RAV-SP180KRT-UL Installation Manual page 10

+001111052201_00Ta.book Page 9 Friday, November 20, 2009 11:45 AM
High-Wall Type
NO OK NO
GOOD GOOD
0.2" (5 mm) dia. hole
Clip anchor
(local parts)
CAUTION
Failure to firmly install the unit may result in
personal injury and property damage if the unit
falls.
• In case of block, brick, concrete or similar type
walls, make 0.2" (5 mm) dia. holes in the wall.
• Insert clip anchors for appropriate mounting
screws.
NOTE
• Secure four corners and lower parts of the
installation plate with 6 mounting screws to
install it.
9-EN
Anchor bolt
Projection
0.6" (15 mm) or less
Mounting screw
0.16" (4 mm) × 1.0" (25 mm)
– 9 –
Installation Manual
Toshiba