AMT Datasouth 7200 User Manual page 15

7200
1.2.2 Functions
No. Names
A Operator panel
B Cover lock
C Inserter
D Output stacker
E Feed knobs
F BIN 1, BIN 2, and BIN 3
load knobs
G BIN 1
H BIN 2
I Thermal head
J Interface connector
(downline)
K Power switch
L Power connector
M Interface connector (Host)
N BIN 3
O Thermal transfer take-up
reel
P Thermal transfer supply
reel
1-4
Functions
Houses the LEDs and keypad needed to operate
the ATB printer.
Locks the side cover. (Use the key to open the
cover.)
Used to insert single coupons (one at a time).
Receives ejected coupons, print-side up. (Has a
capacity of 100 coupons.)
Used to remove jammed coupons.
Used to load coupons into the feed rollers for
each bin.
Used to hold coupons for printing. (BIN 1 has a
capacity of 500 coupons.)
Used to hold coupons for printing. (BIN 2 has a
capacity of 500 coupons.)
Prints on the coupon.
Used to connect the printer to a downline printer
(reserved).
Turns the power on and off.
Used to connect the power cable.
Used to connect the ATB printer to the terminal.
Used to insert coupons. (BIN 3 has a capacity of
1000 coupons externally.)
Holds used ribbon after thermal transfer printing
(type D unit only).
Supplies ribbon for thermal transfer printing (type
D unit only).
Operation Manual