A-16Ii Personal Mixer Specifications - Aviom A-16II User Manual

A-16II Personal Mixer Specifications

Audio Outputs
Line/Headphone TRS
Output
A-Net I/O
D/A Conversion
Indicators
Stereo Operation
Tone Controls
Maximum Level (RMS)
Output Impedance
Freq. Response
THD +N
Crosstalk
Signal to Noise
(unweighted)
Latency
Pro16 A-Net
Power Supply
Input Voltage
Output Voltage
Plug Size
Dimensions
Weight
Options
All Aviom products are designed and manufactured in the USA.
A-16ii P M U G
ersonAl ixer ser
1/4" TRS stereo, headphone or line level
Tip: Audio Left; Ring: Audio Right;
Sleeve: Ground
Auto‑detects mono plugs
1 A‑Net In, 1 A‑Net Out; RJ45 connectors
44.1/48kHz, 24‑bit
Pan: 5 LEDs, 4 red, 1 green;
Channel Volume: 12 red LEDs
Stereo Link, per channel pair; set at the input
module
Variable pan/spread per channel or channel
pair
Treble: +/‑12dB at 9kHz shelving
Bass: +/‑12dB at 160Hz shelving
1.0 watt at 100 Ohms
(Line/Headphone output)
32 ohms
4Hz‑22kHz +0.2dB/‑3dB
< 0.003%
‑90dB
‑90dB typical, A/D to D/A
Measured from AN‑16/i to A‑16II
0.880 msec (measured from analog input to
analog output)
uses unshielded Cat‑5e UTP (or better) cable;
maximum 500ft (150m) between devices
External, DC, universal switching type
100‑240 volts, 50/60Hz, 30VA
18‑24 VDC, 0.5 amp
2 mm
10.75" (273 mm) wide x 5.6" (142.2 mm) deep;
2.25" (57.5 mm) high
3.4 lb. (1.54 kg)
MT‑1 Mic Stand Bracket (uses 6‑32, 1/4‑inch
machine screws)
EB‑1 Extension Bracket
Uide
42