Setting Channel Volume; Setting Pan - Aviom A-16II User Manual

The pan position for a channel can be changed with the p
or right to move the audio in the stereo field. Your changes will be reflected in
the Pan LEDs. The Pan LEDs are used to indicate the left‑center‑right location
of the selected channel. The Pan LEDs have a green middle LED to indicate
the center position in the stereo field with red LEDs on the sides to indicate
left or right positions. Changes will be heard immediately in any speakers or
headphones connected to your Personal Mixer.

Setting Channel Volume

When you change the volume of a channel on the Personal Mixer, the LEDs
in the Volume section of the mixer surface will indicate the level in real time.
When a new channel is selected, its current volume is instantly indicated on
the LEDs. When no LEDs are lit, channel volume is at its minimum setting.
To make changes to a channel:
• Select a channel by pressing its numbered button—the
button's upper LED will light.
• Rotate the
to the left to lower the volume

Setting Pan

The Pan indicator is made up of five LEDs. The center LED is green. The LEDs
on either side of center are red. As you turn the p
in various combinations. At either end of the display only one LED will be lit
to indicate that the channel is panned full left or right.
When using stereo linked channels, the LEDs light in different patterns, using
a pair of LEDs on either side of the display to indicate the width of the stereo
A-16ii P M U G
ersonAl ixer ser
The Pan and Volume Controls for the selected channel
V
knob to the right to increase the volume,
oluMe
Uide
knob. Turn it left
aN
knob, the LEDs will light
aN
21