•
Edit the channel volumes on the current mix as needed.
•
Save the mix as a Preset to preserve the changes.
Hold G
Saving a Preset
When you select a channel by pressing its corresponding numbered channel
button, the current settings for channel volume and panning are indicated
instantly in the Volume and Pan LED readouts. When a channel is selected,
you can always make real‑time changes to its settings. These changes are
temporary until the mix is stored as a Preset.
Each channel button on the A‑16II front panel also serves as a memory
location. Saving a mix as a Preset allows instant recall of up to sixteen mix
scenes.
To save a mix as a Preset:
•
Hold both the
•
While holding down
channel buttons (1 to 16) where you want the mix to be
saved.
•
All sixteen channel buttons will flash briefly to indicate that
the Save operate was successful.
•
Release the
Preset Behavior
The A‑16II Personal Mixer always recalls Preset #1 when it powers up. To have
your favorite mix ready to go as soon as the monitor system is powered up,
store that mix to Preset location #1. Any temporary edits that are not saved to
a memory location are cleared when the A‑16II is turned off.
A-16ii P
M
U
G
ersonAl
ixer
ser
and then press M
Roup
R
and G
ecall
R
ecall
R
and G
ecall
Roup
Uide
to use the Global Trim function.
ute
buttons.
Roup
and G
, press one of the
Roup
buttons.
31