Fujitsu ETERNUS DX100 S3 Operation Manual page 65

Chapter 5 Expansion Functions
5.1 Installing Additional Drives
■
For 3.5" Drives
1
In the [Storage] screen of [Component] on the ETERNUS Web GUI screen, check that all components of
the ETERNUS DX are in normal status.
2
Wear a wrist strap or touch a metal part to discharge the human body's natural static electricity.
3
Remove the dummy drive unit from the slot in which the drive is to be installed.
Push into the tab of the dummy drive unit and pull it straight out of the drive slot.
Keep the removed dummy drive units in a safe place where they will not be lost.
4
Install the new drive.
(1)
Press the catch on the drive lock lever to unlock it.
Tag
(2)
Insert the drive all the way into the slot, making sure that it is firmly seated and that the lock
lever is still left open.
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Operation Guide (Basic)
Tab
Lock lever
Copyright 2014 FUJITSU LIMITED
Dummy drive unit
65
P3AM-7662-04ENZ0