2.5"/3.5" Type Drive Enclosure; Front; Figure 1.19 Front View Of A 2.5" Type Drive Enclosure; Figure 1.20 Front View Of A 3.5" Type Drive Enclosure - Fujitsu ETERNUS DX100 S3 Operation Manual

Chapter 1 Component Name/LED Name
1.2

2.5"/3.5" Type Drive Enclosure

1.2 2.5"/3.5" Type Drive Enclosure
An operation panel and drives are installed in the front of the drive enclosure (2.5"/3.5"). I/O modules and
power supply units are installed in the rear.
1.2.1

Front

This section provides the names of the components in the front of a drive enclosure.
■
2.5" Type

Figure 1.19 Front View of a 2.5" Type Drive Enclosure

1 2
3
1. Operation panel
2. 2.5" drive
3. Flange cover
■
3.5" Type

Figure 1.20 Front View of a 3.5" Type Drive Enclosure

1 2
3
1. Operation panel
2. 3.5" drive
3. Flange cover
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Operation Guide (Basic)
27
Copyright 2014 FUJITSU LIMITED
3
3
P3AM-7662-04ENZ0