Figure 1.13 Host Interface For Fc Cable Connection (Installed In A Controller); Figure 1.14 Host Interface For Copper Twinax Cable Connection (Installed In A Controller) - Fujitsu ETERNUS DX100 S3 Operation Manual

Chapter 1 Component Name/LED Name
1.1 Controller Enclosures
●
FC, iSCSI 10Gbit/s, FCoE, Ethernet 10Gbit/s (for FC Cable Connection)
The ports on the host interface are Dual LC connectors for connecting FC cables.

Figure 1.13 Host Interface for FC Cable Connection (Installed in a Controller)

1
1. Host interface (CA#0)
2. Host interface port (CA#0, Port#0)
3. Host interface port (CA#0, Port#1)
4. Host interface (CA#1)
5. Host interface port (CA#1, Port#0)
6. Host interface port (CA#1, Port#1)
●
iSCSI 10Gbit/s, FCoE, Ethernet 10Gbit/s (for Copper Twinax Cable Connection)
The ports on the host interface are connectors for connecting Copper Twinax cables.

Figure 1.14 Host Interface for Copper Twinax Cable Connection (Installed in a Controller)

1
1. Host interface (CA#0)
2. Host interface port (CA#0, Port#0)
3. Host interface port (CA#0, Port#1)
4. Host interface (CA#1)
5. Host interface port (CA#1, Port#0)
6. Host interface port (CA#1, Port#1)
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Operation Guide (Basic)
2 3
2 3
Copyright 2014 FUJITSU LIMITED
5 6
4
5 6
4
23
P3AM-7662-04ENZ0