AMT Datasouth Fastmark 400 Series User Manual page 2

This label printer complies with the requirements in Part 15 of FCC rules for a Class B or A
computing device. Operation of this equipment in a residential area may cause unacceptable
interface to radio and TV reception, requiring the operator to take whatever steps are necessary to
correct the interference.
Place the printer on a flat, firm and solid surface.
Do not place the printer near a heat source or near water.
Refer to the specification label on the bottom of this printer and ensure that your power source
exactly meets these requirements.
Do not open the printer during operation to avoid electrical shock.
Do not attempt to disassemble this printer if it malfunctions.
All rights are reserved. No part of this document may be reproduced or issued to third parties in
any form without the permission of AMT Datasouth.
The material in this document is provided for general information and is subject to change
without notice.
PCL is a registered trademark of Hewlett-Packard Company
Windows, MS-Word and MS-DOS are registered trademarks of Microsoft Corporation
PC is a registered trademark of International Business Machines
Centronics is a registered trademark of Centronics Corporation
CodeSoft is a registered trademark of Techniques Avancees
BarTender is a registered trademark of Seagull Scientific Systems, Inc
LabelView is a registered trademark of Techniques Avancees
LabelMatrix is a registered trademark of StrandWare, Inc
IMPORTANT SAFETY INSTRUCTIONS
AND OTHER NOTICES
TRADEMARK CREDITS
User's Guide 1