Pro Gram Ma Ble Fea Tures; Us Ing The Cliff Net Wiz Ard Pro In Stal La Tion Soft Ware; Pro Gram Ming The User- Selectable Fea Tures - Clifford Polaris 4 Installation Manual

Mobile security/convenience system
Hide thumbs Also See for Polaris 4:
Table of Contents

Advertisement

Eight- Event To tal Re call (Con tin ued)
4. Refer to the following chart. The first number you wrote down was the most recently
activated trigger or sensor. The next number is the second most recent, and so on up to as
many as the last eight activations.
Num ber of LED flashes
be tween pauses
2 flashes
4 flashes
5 flashes
6 flashes
7 flashes
10 flashes
5. If a sensor is often activated, decrease that sensor's sensitivity (or reposition the sensor, if
necessary). If a certain trigger is often activated, check pin switch operation, verify that
the pin switch is not exposed to moisture and check the trigger wire for possible shorting.
Polaris 4 comes from the factory with its features preprogrammed as noted in bold text in the
tables on pages 15 and 17. Some features can be programmed by the installer or the user,
others can only be programmed by the installer. There are two tables provided which define
the user-programmable and installer-programmable features.

Us ing the Cliff Net Wiz ard Pro In stal la tion Soft ware

CliffNet Wizard Pro provides almost intuitive access to all installer and user-programmable
features through a user-friendly, graphical user interface. Because CliffNet Wizard Pro is
Windows™-compatible, most operations can be accomplished by simply pointing and clicking
a mouse. CliffNet Wizard Pro totally eliminates complicated programming charts and lengthy
programming sequences. Please refer to the CliffNet Wizard Pro User's Guide for more
programming information if you are using the CliffNet Wizard Pro Installation software.
Otherwise, for manual programming refer to the tables provided in the following sections.
Trig ger/sen sor in di ca tion
Dual-Zone Piezo Sensor or Optional Sensor
Door Trigger
Trunk Trigger/Hood Trigger (trunk only, if IntelliStart 4 has been
Hood Trigger (only if optional IntelliStart 4 has been installed)
An attempt was made to turn on the
ignition or start the engine while the system was armed
System Power Interruption

Pro gram ma ble Fea tures

13
installed)

Advertisement

Table of Contents
loading

Table of Contents