Economy Mode; Child Lock / Function Lock; Fan Operation - Rinnai RHFE-309FT Operation And Installation Manual

CUSTOMER INFORMATION - OPERATION

Economy Mode

6
The Economy (ECON) function is an energy saving features designed to control the room temperature
and prevent discomfort from over heating.
• When the room temperature reaches the set temperature, the set temperature decrease at the rate
of 1°C per 30 minutes in two cycles.
• The set temperature on the display does not change.
• Room temperature may not decrease in some cases, this is depending on room style, location of
the appliance and the temperature outside the room.

Child Lock / Function Lock

The Child Lock function will help to prevent accidental operation as well as prevent small children from
altering the controls. To operate the Child Lock simply press the Child Lock
activated immediately and the Child Lock indicator
To Deactivate the Child Lock simply press the Child Lock
indicator will go out. The Child Lock can be deactivated at any time in this way.
15
During normal operation the Child Lock may be activated and all controls, other than the 'OFF' switch,
will be locked. Deactivating the Child Lock releases the controls. If the Child Lock is activated whilst the
heater is turned 'OFF', then all functions will be locked. If the heater is turned 'OFF' while the Child Lock
is activated, it cannot be turned 'ON' again until the Child Lock is deactivated.

Fan Operation

The fan turns 'ON' automatically when the heat exchanger warms up and off when it cools down.
This helps to prevent cold draughts and maximises efficiency.
1. The Economy mode can only be operated when the heater is turned 'ON', but remains in the
system memory until deactivated.
Select the Economy mode before selecting timer operation.
2. Press the Economy
3. Press the Economy
Rinnai Australia
7
6 button to start the Economy function. The Economy indicator
button once more to switch 'OFF' the economy function.
6
will glow.
15
button for 2 seconds and the Child Lock
7
9 Energysaver® - Operation & Installation Manual
button. The function is
7
will glow.
14