Clarion VX401 Owner's Manual & Installation Manual page 47

CONTENTS
1. Before Starting 47
2. Package Contents 47
3. General Cautions 47
4. Cautions On Installation 48
5. Installing The Main Unit 49
6. Cautions On Wiring 51
7. Wire Connections 52
1. Before Starting
1. This set is exclusively for use in cars with a
negative ground 12V power supply.
2. Read these instructions carefully.
3. Be sure to disconnect the battery "-" terminal
before starting. This is to prevent short circuits
during installation. (Figure 1)
2. Package Contents
Car battery
Figure 1
Main unit 1
Wiring harness 1
AV cable 1
Remote control unit.. 1
Battery (CR2025) 1
(Installed in remote control)
Trim ring 1
Cleaning cloth 1
Warranty Card 1
Owner's manual and
Installation manual 1
Electro tap 1
3. General Cautions
1. Do not open the case. There are no
user- serviceable parts inside. If you
drop anything into the unit during
installation, consult your dealer or an
authorized Clarion service center.
2DIN trim ring 200mm wide
(VX401 only) 1
Back Strap (VZ401 only) 1
Mounting Bracket key
(VZ401 only) 2
Flush mount bolts
(VX401) 8
(VZ401) 4
Hexagon Head Screw
(VX401) 8
(VZ401) 5
2. Use a soft, dry cloth to clean the case.
Never use a rough cloth, thinner,
benzine, or alcohol etc. For tough dirt,
apply a little cold or warm water to a
soft cloth and wipe off the dirt gently.
VX401NZ401
47